Antennas


LISN/AMN

Type Topology Impedance Current max. Paths Options
CISPR 16-1-2 socket
NSLK 8117 V-LISN (50 µH + 5 Ω) || 50 Ω 2 x 10 A 2
NSLK 8127 V-LISN (50 µH + 5 Ω) || 50 Ω 2 x 16 A 2 RC, PLC
NSLK 8126 V-LISN (50 µH + 5 Ω) || 50 Ω 2 x 16 A Schuko
4 x 16 A CEKON
4 RC
NSLK 8128 V-LISN (50 µH + 5 Ω) || 50 Ω 2 x 16 A Schuko and
4 x 32 A CEKON
4 RC
NSLK 8163 V-LISN (50 µH + 5 Ω) || 50 Ω 4 x 64 A CEKON 4 RC
CISPR 16-1-2 Wing Terminals
NSLK 8121 V-LISN (50 µH + 5 Ω) || 50 Ω 4 x 50 (100) A 4 RC, Hochstrom, 400/700V, Lüfter
NSLK 8122 V-LISN (50 µH + 5 Ω) || 50 Ω 2 x 50 A 2
NSLK 8129 V-LISN 50 µH + 5 Ω 4 x 200 (300) A 4 RC, 400/700 V, Lüfter
NNLK 8129-2 HV V-LISN 50 µH + 5 Ω 2 x 200 (300) A 2 RC,TC
NSLK 8130 V-LISN 50 µH + 5 Ω 2 x 200 (300) A 4 RC
NSLK 8140 V-LISN 50 µH + 5 Ω 2 x 200 (300) A single
Automotive
NNHV 8123 V-LISN 5 µH || 50 Ω 70 (100) A single
NNHV 8123-200 V-LISN 5 µH || 50 Ω 200 A single
NNHV 8123-400 V-LISN 5 µH || 50 Ω 400 A single
NNBM 8124 V-LISN (5µH + 1 Ω) || 50 Ω 70 (100) A single N-connector
NNBM 8124-200 V-LISN (5µH + 1 Ω) || 50 Ω 200 A single N-connector
NNBM 8124-400 V-LISN (5µH + 1 Ω) || 50 Ω 400 A single N-connector
NNBM 8126 A 890 V-LISN 5 µH || 50 Ω 70 (100) A single DO-160
BAN 8508 8 A (DC) single
BAN 8530 30 A (DC) single
MIL
NNBL 8225 V-LISN (50 µH + 5 Ω) || 50 Ω 20 A single
NNBL 8226 V-LISN (50 µH + 5 Ω) || 50 Ω 70 (100) A single
NNBL 8226-HV V-LISN (50 µH + 5 Ω) || 50 Ω 70 (100) A single
NNBL 8226-2 V-LISN (50 µH + 5 Ω) || 50 Ω 70 (100) A 2
NNBL 8229-HV V-LISN (50 µH + 5 Ω) || 50 Ω 200 A single
NNBL 8230 V-LISN (50 µH + 5 Ω) || 50 Ω 300 A single
NNBL 8240 V-LISN (50 µH + 5 Ω) || 50 Ω 800 (1000) A single
T-ISN
NTFM 8131 T-ISN 150 Ω ± 10% 3 A (AC) 2
NTFM 8158 T-ISN 150 Ω ± 20 Ω 600 mA DC (pair) 2
CAT5 8158 T-ISN 150 Ω ± 20 Ω 600 mA DC (pair) 2
CAT3 8158 T-ISN 150 Ω ± 20 Ω 600 mA DC (pair) 2
ISN S8 T-ISN 150 Ω ± 20 Ω
150 Ω + 60 Ω /-45 Ω
1 A (DC) 8
ISN S1 T-ISN 150 Ω ± 20 Ω
150 Ω + 60 Ω /-45 Ω
1 A (DC) single
Special-LISN
Pilot ISN 150 Ω ±20 Ω 1.4 A DC 2
ECSS LISN 1 (1.5 µH) || 50 Ω 10 A 2
ECSS LISN 2 (2 µH) || 50 Ω 10 A 2
ECSS LISN 2 - 75A (2 µH) || 50 Ω 75 A 2
ECSS LISN 3 (0.7 µH) || 50 Ω 10 A 2
NPLC 8500 V-LISN 1 Ω 16 A single
PVDC 8300 PV-LISN Universal 150 Ω common
100 Ω differental
50 A (100 A with opt. fans) 2 Fans
PVDC 8301 PV-LISN Universal 150 Ω common
100 Ω differental
200 A 2
TEMP 8400 Tempest - V-LISN 1.4 kΩ 16 A 2 TEMP 8401

Absorbing Clamps

MDS 21 B - EMI Absorbing Clamp

EMI Absorbing Clamp
30 - 1000 MHz
acc. CISPR 16 for interference power with silicon coated rolls

ZJISTIT VÍCE

CMAD 1614 - Common Mode Absorption Device

The CMAD 1614 - Common Mode Absorption Device consists of many precision cut ferrite half-toroids, which are embedded in a grey plastic housing. The unique floating toroid bearing ensures a perfect fit of the ferrite surfaces. Two quick-locks at the long side allow opening and closing of the clamp within seconds. Cable bundles or coaxial cables with a maximum diameter of 26 mm are accepted by the clamp without disassembling connectors or interrupting any circuitry. The combination of short length and large cable hole diameter offer a broad variety of applications for the CMAD 1614. Each common mode absorption device comes with an individually measured calibration certificate.

ZJISTIT VÍCE

CAL CMAD 1614 - Calibration Fixture for CMAD 1614

The CAL CMAD 1614 calibration fixture is used to calibrate / verify the performance of the common mode absorption device CMAD 1614. The fixture consists of an aluminium base plate with two sideplates, adjustable in height and position and each of them equipped with N-connector and inner conductor fixture. A variety of inner conductors with 4 mm diameter is part of the delivery. The calibration fixture was designed for measurements acc. to CISPR 16-1-4 sections 9.5 and 9.6.

ZJISTIT VÍCE

Other

For other products click here